CORRECT DRIVING OPERATION
Make sure to check the oil, gasoline, etc., before
●
starting the engine.
Please ensure that the main stand and side stand are
●
lift up at starting the engine.
At starting the engine, grip the brake as always.
●
Drive with care for both safety reasons and longer
●
vehicle life.
For 1 month(or 500 km) after purchasing the
●
vehicle, drive moderately avoiding fast starts and fast
acceleration.
WARNING
Make sure that the rear wheel is
●
locked when starting the engine to
prevent an unexpected sudden start of
the vehicle.
At standing the main stand, if
●
accelerating by operating the throttle,
the rear wheel may touch the body,
then it occurs a serious damage.
18
ENGINE STARTING
Lock the rear wheel
After certificating the Smart key, turn the main
switch to the
(ON) position. (Blue lamp lights)
The start is possible when the Smart key is in 1
●
meter from the vehicle.
Press the start button. At operating start, the green
lamp of the main switch lever lights.
<USING THE ELECTRIC START(CELL)>
Press the start button without rotating the throttle grip.
●
※
At searching the Smart key, the time of certification
make take long, keep pressing the start button by
the time when the vehicle starts by motor rotating.
Immediately release the starter button
●
as soon as the vehicle has been started.
Do not push the starter button when
●
the engine is running. This can damage
the starting motor.
Smart key
If you take the Smart key together cell
●
phone,
computer, metallic material, the
communication error between the
Smart key and the vehicle may occur
then the vehicle may not start.
CAUTION
navigation,
note-book