Uc Surface Mix Controls - PRESONUS Studio 192 Owner's Manual

4 UC Surface Monitor Control Software
4.2

UC Surface Mix Controls

UC Surface Mix Controls
4.2
4
1. Mix Select. The Mix Select buttons allow you to choose the mix you'd
like to control (Auxes, Mains, FX). UC Surface provides a mix for each
of the two effects buses. The returns for these effects are available
in each mix to customize the amount of reverb and delay.
2. Copy Mix. Copying the current mix allows you to quickly
set up multiple mixes. Press the Copy Mix button and then
click on the desired Mix Select button to paste it.
3. Mix Masters. The Mix Masters button allows you to view only the Master fader for
every monitor. Soloing or muting a group master will solo or mute all the channels
in the mix. To close this view, click or tap on the Mix Masters button again.
4. Flex Fader. The fader immediately to the left of the Mix Select
buttons controls the output level of the currently selected mix.
5. Show/Hide Main Fader. Click this button to show or hide the Main
fader. Hiding the Main fader can free up screen real estate on smaller
displays. When the Main fader is hidden, you can still adjust the main
mix level by selecting the main mix and using the Flex fader.
6. Main Fader. The fader for the main mix is accessible to the right
of the Mix Select area. As previously mentioned, this fader can be
hidden and the Flex fader for the main mix can be used instead.
Studio 192 and Studio 192 Mobile
Owner's Manual
5
3
6
1
2
16