Uc Surface Control Software - PRESONUS Quantum Series Owner's Manual

4

UC Surface Control Software

3.2 Using a Quantum 2626 Interface with Popular Audio Applications
4 UC Surface Control Software
UC Surface is a powerful control software for your Quantum 2626 interface.
These control functions are completely integrated inside Studio One.
UC Surface allows users of other popular DAW applications to access
these functions. UC Surface provides preamp level controls, phantom
power, line-level input sensitivity switching, main encoder assignments,
and, for Quantum 2626 users, mute/dim and mono functions.
UC Surface is designed to verify that your Quantum 2626 interface
has the correct firmware version installed. You will be prompted
if your Quantum 2626 interface needs its firmware updated. Click
on the Update Firmware button to begin the update.
Warning: Do not power off or disconnect your Quantum 2626 interface
during the firmware update. Once the firmware update is successfully
completed, you will be alerted and instructed to disconnect your power supply and
Thunderbolt cable and reconnect it before rebooting your device. It is not sufficient
to simply power down your unit, you must disconnect the power source.
When the firmware update is complete, you must disconnect the
physical power source from your Quantum 2626 interface and reconnect
it. Powering it off it will not complete the update process.
StudioLive™ Software
Library Reference Manual
10