Configuring Audio Devices - PRESONUS Studio 192 Owner's Manual

5 Studio One Artist Quick Start
5.2 Setting Up Studio One

5.2.1 Configuring Audio Devices

1. In the middle of the Start page, you will see the Setup area. Studio One
Artist automatically scans your system for all available drivers and selects
a driver. By default, it will choose a PreSonus driver if one is available.
Power User Tip: If your device has zero-latency monitoring functionality from within
Studio One, you will see the Z-mix icon. If you do not see this icon, make sure that you have
launched Universal Control or Universal Control-AI. PreSonus audio interfaces require
their DSP mixing control panels to be running in the background for Z-mix functionality.
2. If you do not see your device listed on the Start page when
you launch Studio One, click on the Configure Audio Devices
link in the Setup area to open the Options window.
In the Options window, click on the Audio Setup tab and
select your device driver from the pull-down.
Studio 192 and Studio 192 Mobile
Owner's Manual
33