Controlling Studio 192-Series Mic Preamps From Your Daw - PRESONUS Studio 192 Owner's Manual

3 Connecting to a Computer
3.4

Controlling Studio 192-Series Mic Preamps from your DAW

Controlling Studio 192-Series Mic Preamps from your DAW
3.4
Studio 192-series microphone preamps can be controlled from the front panel, UC
Surface, or Studio One. If you configure your Studio 192-series interface as a MIDI
device inside your DAW application, you can also control trim and phantom power
from within your DAW environment and store those settings with your session.
Below is a chart explaining the MIDI controls for your Studio 192-series preamps:
Preamp MIDI Channel
Preamp 1 Channel 1
Preamp 2 Channel 2
Preamp 3
Channel 3
(Studio 192)
Preamp 4
Channel 4
(Studio 192)
Preamp 5
Channel 5
(Studio 192)
Preamp 6
Channel 6
(Studio 192)
Preamp 7
Channel 7
(Studio 192)
Preamp 8
Channel 8
(Studio 192)
For more information on controlling your preamps
from Studio One, please review Section 5.4.
Studio 192 and Studio 192 Mobile
Trim Level Phantom Power ON /OFF
CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #7 CC #14 (0 to 63 = On, 64 to 127 = Off)
Owner's Manual
13