Punching In - PRESONUS Studio 192 Owner's Manual

5 Studio One Artist Quick Start

5.4.2 Punching In

5.4.2 Punching In
You can choose to hide the preamp controls for your Studio
192-series interface from the Console Options menu. Simply
uncheck the box next to "Show audio device controls. "
Note: Because preamp control for the DigiMax DP88 is bidirectional,
both the ADAT input and the ADAT output must be connected
in order for Studio One to display its preamp controls.
The unique integration between the processing your Studio 192-series
interface and Studio One makes punching in easier than ever. This section will
guide you through setting up a punch in so that there is no change sonically
between audio you're playing back and the audio you're recording.
1. Before you begin, go to Studio One>Preferences and click on the Advanced tab.
2. On the Console preference tab, check the box next to "Audio track
monitoring mutes playback (Tape Style). This will allow you use
Z-Mix to monitor during a punch in. Click Apply and then OK.
Studio 192 and Studio 192 Mobile
Owner's Manual
46