Uc Surface Monitor Control Software - PRESONUS Studio 192 Owner's Manual

4

UC Surface Monitor Control Software

3.4 Controlling Studio 192-Series Mic Preamps from your DAW
4 UC Surface Monitor Control Software
UC Surface is a powerful monitor control software that provides everything
you need to create high-quality monitor mixes and more with your
Studio 192-series interface, using all of the processing features of a StudioLive
AI-series digital mixer. These monitoring functions are completely integrated
inside Studio One. UC Surface allows users of other popular DAW applications
to access these functions. UC Surface provides control of channel, effects return,
and Mix output levels; Fat Channel parameters, and effects send levels.
It is vital to remember that lowering the channel fader in UC Surface
will not lower the signal in your host application, so it is possible to clip
the recording without clipping the monitor mix. You must set the level
for the recording using the trim controls in UC Surface or the preamp
control section on the face of the Studio 192-series interface.
A quick note on playback streams: The channels labeled "DAW" in
UC Surface carry a playback stream from your host application (DAW).
Traditionally, if you wanted to route a track in your DAW to a physical
output on your interface, you assigned this output in your host application.
Because UC Surface provides much more flexible routing, you can now route
this track to one output or every output, by itself or as part of a mix.
UC Surface is designed to verify that your Studio
192-series interface has the correct firmware version installed. You will
be prompted if your Studio 192-series interface needs its firmware
updated. Click on the Update Firmware button to begin the update.
WARNING: Do not power off or disconnect your Studio 192-series interface
during the firmware update. Once the firmware update is successfully
completed, you will be alerted and instructed to reboot your device. Please make
sure to close all applications before running the firmware updater.
Studio 192 and Studio 192 Mobile
Owner's Manual
14