Hardware Assign - HEADRUSH Pedalboard User Manual

Hardware Assign

The Hardware Assign screen enables you to customize
how the HeadRush
expression pedal, and parameter knobs control each rig.
To open the Hardware Assign screen, tap the 
button in the upper-right corner of the main screen,
and then tap Hardware Assign.
To return to the main screen, tap the  button in the
upper-left corner.
Important: The Hardware Assign settings are all part of
the overall rig, so remember to save your changes you
want to keep.
To set the color associated with the rig, tap it in the upper-left part of the screen. This color will appear next to
the rig name when you view a list of all available rigs or when you view and create setlists. It will also be the color
of the corresponding footswitch indicator when the HeadRush Pedalboard is in Rig View.
To set the tempo of the rig's time-based effects (delays, modulation, etc.), tap the button under Tempo to
select Current or Fixed.
Current: The rig will use the last-used tempo or the one set by the Tempo footswitch.
To set the tempo, press the Tempo footswitch (the lower-right-most one) at the desired tempo 3–8 times to
set the new tempo in beats per minute (BPM). You can do this anytime that footswitch display shows Tempo.
Fixed: The rig will use a tempo that you set here.
To set the tempo, turn the encoder to set the desired tempo in beats per minute (BPM). You can set the
tempo only in this Hardware Assign screen.
The MIDI Prog field determines the MIDI program change number of the rig. Use the Prog Change setting in the
Global Settings screen to determine whether the HeadRush Pedalboard can send and/or receive MIDI program
change messages (see
To set the MIDI program change number, turn the encoder to select it (0–127).
Important: If a rig is using a number, that number will be unavailable and cannot be assigned to another rig. Also,
saving a rig with a new name will save the rig but without this program change number (to prevent rigs from
sharing the same number).
Pedalboard's footswitches,
Global Settings > MIDI Settings for more information).
19