Effects - HEADRUSH Pedalboard User Manual

Effects

There are several types of available effects. Their adjustable settings depend on the type of effect.
In
These input settings control the signal into the models of
your rig:
Preset: This is the current input preset, which includes
its settings on the right edge of the display and its
locked/unlocked state.
Parameters: This menu determines whether these
input settings are locked or unlocked.
When unlocked, the settings will change to the
new rig's input settings each time you load a new
rig. The lock icon on the main screen will be grey.
When locked, the settings will be retained as
"global" input settings, regardless of the rig. The
lock icon on the main screen will be red.
Rig Input: This setting determines whether the rig's input signal is taken from the guitar input (Guitar) or the
right (R) return input (FX Ret R). This menu is shown only when Rig Input is set to Per Rig (in the global
settings (see Global Settings
Input Level Meter: This level meter indicates the current level of your input signal before the input controls
shown on this screen.
Gain: This setting controls the gain level of the signal sent from your guitar into your rig. The available range is
-60.0 to 12.0 dB.
Gate Thrsh (Threshold): This setting controls the signal level required to open the noise gate, enabling the
guitar signal to be sent to the rig. The available range is -120.0 to 0.0 dB. The threshold is represented by a
white line on the input level meter.
Gate Rel (Release): This setting controls the amount of time it will take for the noise gate to close once the
incoming guitar signal stops. The available range is 1–3000 ms.
USB Level: This setting controls the level of the audio signal sent from your computer to the HeadRush
Pedalboard over a USB connection. The available range is -60.0 to 12.0 dB.
to learn about this).
17