Signal Path - HEADRUSH Pedalboard User Manual

Signal Path

You can easily reconfigure the path of your signal chain to split, creating more complex routings.
To reconfigure the signal path, tap  at the bottom of the main screen. The icon will change to match the
current signal path as shown below.
This straight signal path is the default
and the most common.
This signal path splits in the middle
and rejoins near the end. This
configuration is useful if you want to
use two types of effects (or chains of
effects) but want to keep their signals
separate.
See Adjusting Settings >
Parameters > Mix to learn how to
mix the split paths together.
This signal path splits immediately
from the source and rejoins near the
end. Like the second configuration,
this one is useful for using two types
of effects (or chains of effects
independently, but it allows for more
models in the split paths and the
rejoined one.
See Adjusting Settings >
Parameters > Mix to learn how to
mix the split paths together.
10