Rigs; Creating A New Rig - HEADRUSH Pedalboard User Manual

Rigs

While using the HeadRush Pedalboard, a rig is a preset: the combination of assigned models—the amps, cabs,
and effects—and the parameter settings of each of them. You can create, edit, save, and load rigs, making it easy
to recall the perfect sound for each part of your performance.
Each rig has 11 slots, each of which can have one model (amp, cab, or effect) assigned to it. An exception is
when a slot is using an amp and/or cab in a dual configuration (when the 2X button next to it is enabled).
Assigned slots will show graphical representations of the models, and empty slots will show a  symbol.

Creating a New Rig

To create a new rig, tap the  button in the upper-right corner
of the screen, and tap New Rig.
To assign a model (amp, cab, or effect) to an empty slot:
1. Tap the empty slot ().
2. In the list that appears, tap the type of model you want to
assign: Amp, Cab, or effect (Custom IR, Distortion,
Dynamics/EQ, Modulation, Reverb/Delay, FX-Loop, or
Expression).
3. In the list that appears, tap the model you want to assign.
4. In the next list that appears, tap the preset you want to load
for that model.
If you load an amp or cab to a slot with an empty adjacent slot,
the first selectable cab or amp will be loaded automatically to the
other slot. After that, you can configure them independently: you
can separate them in the signal chain, you can change the type
of the amp or cab, and you can delete each model separately.
Model types: amps,
cabs & effects
Available models
for each type.
Available presets
for each model.
13