Views; Stomp View; Rig View; Hybrid View - HEADRUSH Pedalboard User Manual

Views

The eight middle footswitches can be used to activate or bypass models (amps, cabs, or effects) as well as select
rigs or setlists. These footswitches are always in one of four views: Stomp View, Rig View, Hybrid View, and

Setlist View.

To change the view:
1. Press and hold the lower-left footswitch until
Exit appears in its display. The adjacent four
footswitches now correspond to the four
views: Stomp, Rig, Hybrid, and Setlist.
2. Press a footswitch to enter that view.

Stomp View

The middle eight footswitches correspond to
models (amps, cabs, or effects) in your signal
chain. Press a footswitch to activate or deactivate
its model.

Rig View

The middle eight footswitches correspond to rigs
you have saved. Press a footswitch to load its rig.
To show the previous or next four rigs, press
the upper-left (Bank ) or lower-left (Bank )
footswitch.

Hybrid View

The upper middle four footswitches correspond
to rigs you have saved. Press one of these
footswitches to load its rig. The lower middle four
footswitches correspond to models (amps, cabs,
or effects) in your signal chain. Press one of these
footswitches to activate or deactivate its model.
Setlist View
The middle eight footswitches correspond to
setlists you have saved. Press a footswitch to
load its setlist.
Exit Stomp
Rig 
Model 1 Model 2
Rig 
Model 5 Model 6
Bank 
Rig 1
Bank 
Rig 5
Bank 
Rig 1
Bank 
Model 1 Model 2
Bank 
Setlist 1 Setlist 2
Bank 
Setlist 5 Setlist 6
Rig Hybrid Setlist
Model 3 Model 4
Model 7 Model 8
Rig 2 Rig 3 Rig 4
Rig 6 Rig 7 Rig 8
Rig 2 Rig 3 Rig 4
Model 3 Model 4
Setlist 3 Setlist 4
Setlist 7 Setlist 8
Looper
Tuner
Looper
Tuner
Looper
Tuner
12