Cochran commander+ Owner's Manual page 46

Table of Contents

Advertisement

Dive Profile Storage
Profile Sampling
Typical Battery Life*
* With fresh new ENERGIZER
Note: Specifications are additionally +/- one least significant digit due to rounding.
Specifications are subject to change without notice.
CLEANING THE COMMANDER+: Clean the unit only with fresh water after each use.
Towel dry the unit, never use air pressure to dry the unit. This could damage the unit
and will void the warranty. Do not use chemicals to clean the case or lens as this may
damage the unit, or permanently fog the lens.
BATTERY CHANGES: The batteries should be changed when the 'BATT' legend is
seen or battery voltage reaches 2.4 volts as can be seen during the PreDive Prediction.
The unit will run until the battery voltage drops below 2.0 volts. Only use fresh, name
brand N-Cell size Alkaline batteries for maximum battery life. At this time, Eveready
Energizer Alkaline is recommended.
Do not use Lithium or rechargeable batteries, which may damage the computer and
void the warranty. Be sure to confirm that the batteries are REALLY new and have not
been sitting on a shelf losing life. Cold temperatures tend to shorten apparent battery
life. Change batteries annually regardless of battery condition.
DO NOT ALLOW THE COMMANDER+ TO HAVE LOW OR NO BATTERIES FOR ANY
EXTENDED PERIOD OF TIME! THIS WILL DISCHARGE THE INTERNAL LITHIUM
BATTERY THAT KEEPS THE MEMORY ALIVE!
6 Dive hours at one second sampling
24 Dive hours at four second sampling (default)
90 Dive hours at 15 second sampling
Selectable 1-15 secs, 1-second increments
Over 200 dive hours or 1 year, TACLITE off
Over 40 hours, TACLITE on
brand alkaline batteries
®
44

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the commander+ and is the answer not in the manual?

Table of Contents