Cochran commander+ Owner's Manual page 31

Each log will be displayed for 30 seconds before "timing-out" and returning to the
Surface Mode. Via the optional Analyst
Mode "time-out" timer can be set from 10 to 60 seconds in one-second increments
which would allow the user to view each dive for more or less time.
It is not necessary to allow the time-out timer to complete prior to initiating a dive. Once
the diver has descended below two metres, the COMMANDER+ will immediately enter
the Subsurface Mode.
BOTTOM
NOTE: The overall Dive Number allows the diver to immediately identify the total
number of dives made with that COMMANDER+. If the logbook example shown was
the most recent dive made, it could be identified that that 235 dives had been made with
that specific unit.
®
Personal Computer Interface, the Logbook
A
S
C
E
N
T
SURF
TEMP
METRIC
MAX DEPTH
.
29
Fi g ure 9
LO G BO O K M O D E D I SPLA Y
O ve r a l lD i ve N u m b e r 2 3 5
M a x D e p th 1 8 .9 m tr
Bo tto m Ti m e 3 9 m i n s
Su rfa c e Ti m e
M i n Te m p e ra tu re
M a x A sc e n t R a te 5 m p m
Ba tte ry
5 2 m i n s
2 1 c
O K