Cochran commander+ Owner's Manual page 37

3. The first display seen is for setting the added Conservatism. The upper left corner
will display a "C-2". The "C" indicates you are programming Conservatism and the
"-2" indicates the 10's digit is being programmed. The Conservatism Percentage
being programmed is displayed bottom center. Upon initial programming, this
value should display "00" as set at the factory.
4. Using the same coin or metal object, bridge Contacts 2 and 3 to increment the 10's
value. A confirmation beep will sound with each increment. If diving a
Conservatism of 15%, Contacts 2 and 3 should be bridged until a "1" is displayed
at the bottom center's 10's digit.
5. Next, bridge Contacts 1 and 2 to select the 1's digit programming sequence. A "C-
1" being displayed at the upper left corner of the display identifies this. The "C"
identifies that the Conservatism percentage is still being programmed while the "-1"
identifies the 1's digit is being programmed.
35
Fi g u r e 1 3
FI ELD PRO G R A M M I N G
(Se tti ng TA C LI TE o n/o ff)
(N o N i tro x Fu n c ti o n s)
TA C LI TE O n