Cochran commander+ Owner's Manual page 23

when the PO2 reached the current set point of 1.6 ATA. NDC times shown are
approximate.
Refer to the Analyst
Prediction Mode, the unit will compute and display the maximum safe time at that depth.
Current Surface Temperature and Battery Voltage are also displayed. Battery Voltage
is displayed in the lower right hand corner of the display. Altitude is indicated in six
ranges via the Ascent Rate Bar Graph as follows (Altitude compensation is seamless
from 600m to 4.5km above sea level.
The six ranges are for display purposes only):
0 Bars
2 Bars
4 Bars
REMAIN TIME
SURFACE MODE: Surface Mode is entered after the COMMANDER+ successfully
completes its Self-Diagnostic Mode after being turned on or after the PostDive Interval
after a dive. In this mode, current Surface Time, the previous dive's Maximum Depth,
®
description about how to modify parameters. During the PreDive
sea level to 600 metres
1,200 to 1,800 metres
2,400 to 3,000 metres
NDC
DEPTH
.
1 Bar 600 to 1,200 metres
3 Bars 1,800 to 2,400 metres
5 Bars greater than 3,000 metres
TEMP
Al lSegm ent s1l l um i nat ed
Dept h Pr edi ct
NDC T i m e Pr edi ct 78 m i ns
METRIC
T em per at ur e
Al t i t ude
Bat t er y Vol t age
.
21
Fi gur e 4
PRE DI VE PREDI C T I O N
15 m t r
23 c
< 600 m t r
3. 2 v