Cochran commander+ Owner's Manual page 43

The COMMANDER+ is shipped from the factory as FIXED with an 18 metre per minute
alarm.
Selectable Fixed Ascent Rate Alarm Limit: If FIXED Ascent Rate alarm was selected
from the above topic, the user may enter the desired Ascent Rate for the alarm to
sound. As shipped from the factory, this is set to 18 metre per minute. The
COMMANDER+ is shipped from the factory as FIXED with an 18 metre per minute
alarm.
Selectable Ascent Rate Bar Graph (Fixed or Proportional): This option determines
whether the Ascent Rate bar graph indicates the speed of ascent or the percentage of
the selected maximum ascent rate. The COMMANDER+ is shipped from the factory as
FIXED.
Selectable Logbook Dwell Time (10 to 60 seconds): This feature allows the diver to
determine how long (in seconds) that a particular dive's logbook is displayed before the
Logbook Mode is exited. This option is set to 30 seconds as shipped from the factory.
Ascent Rate Responsiveness (0 to 7): This option determines the responsiveness or
sensitivity of the Ascent Rate Bar Graph. Zero is highly responsive and seven is very
slow. This feature is set to three as shipped from the factory.
Remaining Time Responsiveness (0 to 7): This determines the responsiveness of the
Remaining Time information that is displayed. Zero is highly responsive and seven is
very slow. This feature is set to three as shipped from the factory
Metric or Imperial: The diver may select whether the data is computed and displayed
in Metric or Imperial units. The COMMANDER+ may be ordered either way as shipped
from the factory.
41