Control Menus - Martin ExteriorWash 200 Series User Manual

Control menus

To access the control menus, press and hold the MENU button. If prompted, scroll to the user password
and press ENTER. Press ▼ (down) and ▲ (up) buttons to navigate the menus. Press ENTER to select a
menu option. For more information, see 'Accessing and navigating the control menus' on page 16.
The factory default settings are shown in bold.
Menu Sub-menus
DMX
1- 512
Address
Set Scene Totals
Edit Scene Color
(200 & 210 models)
Program
Show
Edit Scene Color
(220 model)
Fade Time
Hold Time
Red
Manual
Green
Mode
(200 &
Blue
210)
White
Manual Warm White
Mode
Cold White
(220)
Display Inverse
Display
Setting
Display Auto Turn Off
Automatic
-
Test
LED Temperature
Power On Hours
Fixture
LED On Hours
Status
RDM device UID
Software Version
Master/Slave
Channel Mode
(200 & 210 models)
Fixture Dimmer Curve
Config
Color Calibration
(200 & 210 models)
White Balance
(200 & 210 models)
1-20
Red
Green
1- last
scene
Blue
White
Cold white
1- last
scene
Warm white
0-120 secs. (3 secs.)
0-600 secs. (1 sec.)
0-255
0-255
0-255
0-255
0-255
0-255
No/Yes
No/Yes
Master
Slave
4 Channel Mode
5 Channel Mode
Optically Linear
Square Law
Inverse Square Law
S-Curve
No/Yes
Red (90% - 100%)
Green (90% - 100%)
Blue (90% - 100%)
TM
Exterior Wash 200 Series User Manual
Explanation
DMX start channel
Number of stand-alone scenes
0-255
0-255
Individual scene
color
0-255
0-255
0-255
Individual scene
color temperature
0-255
Transition time between scenes
Length of time scenes are
displayed
Manually adjust output
Manually adjust output
Flip display
Switch off display 1 min. after
last key press
Lights LEDs together, by color,
and individually
Temperature of onboard sensor
Fixture operating hours counter
LED hours counter
Fixture's unique RDM ID
Currently installed firmware
version
Set master fixture
Set slave fixture
Individual color control
Color mixing with dimmer
Dimming behavior (see page
18)
Apply factory color calibration
Amount of each color used to
make white
23