Table of Contents
Advertisement
4.
Select LOCK PASSWORD and press ENTER.
5.
Press the UP or DOWN arrow button to scroll to the desired password. Press ENTER to save it.
6.
Record your password inside the front cover of this manual.
Factory reset
To reset all user settings to factory defaults:
1.
Access the control menu and select FIXTURE CONFIG. Press ENTER.
2.
Select FACTORY RESET and press ENTER.
3.
Select YES and press ENTER to confirm, or MENU to escape.
Setup via RDM
™
The Exterior Wash
200 Series is compatible with RDM (Remote Device Management). Using an RDM-
compliant DMX controller, you can communicate with Exterior Wash 200 Series fixtures to set DMX
addresses, execute other commands, and retrieve basic fixture data via the data link.
To use Martin M-PC, connect a PC running this application to the data link via the Martin M-DMX USB to
DMX interface box (see 'Related Items' on page 28). Before you can communicate with fixtures, you will
need to send a Scan command from M-PC to detect the devices on the data link.
20
TM
Exterior Wash
200 Series User Manual
Advertisement
Table of Contents
