Table of Contents
Advertisement
Introduction
™
The Exterior Wash
200 Series is a powerful, compact and energy-efficient line of LED lighting fixtures
designed to illuminate mid-sized structures and building facades. All models have built-in displays for
ease-of-use, a wide selection of beam angles and sealed construction suited to permanent outdoor use. A
discreet, optional snoot integrates seamlessly with the fixtures' sleek design to put the light right where
you want it.
This user manual covers all Exterior Wash
green, blue, and white LEDs optimized for long-throw applications, the Exterior Wash 210 with premixed
quad-color LEDs optimized for superior color mixing, and the Exterior Wash 220 with mixable warm-white
and cold-white LEDs that can achieve white tones ranging in color temperature from 2800 K to 6500 K.
Each fixture is supplied with this user manual and an optional control panel cover plate to deter
unauthorized access. They are prepared for hard wiring with 1.8 m (5.9 ft.) cables for power and data
connection.
Fixture overview
Number
Description
1
Front ring with recessed channel for optional diffuser lenses
2
Tilt lock (one on each side)
3
Control panel
4
Mounting bracket
5
Secondary attachment point
6
DMX combined input/output cable
7
AC power cable
8
Pressure relief valve
Before using the product for the first time
Read 'Safety information' on page 5 before installing, operating or servicing the fixture.
1.
2.
Unpack and ensure that there is no transportation damage before using the fixture. Do not attempt to
operate a damaged fixture.
3.
If testing and/or setting up the fixture before it is hard-wired to a mains supply, install a local power
plug (not supplied) to the end of the supplied power cable.
4.
Before operating, ensure that the voltage and frequency of the power supply match the power
requirements of the fixture.
5.
Check the support pages on the Martin Professional website at www.martin.com for the most recent
user documentation and technical information about the fixture. Martin™ user manual revisions are
identified by the revision letter at the bottom of the inside cover.
™
200 Series models: the Exterior Wash 200 with individual red,
Parts identification
TM
Exterior Wash
200 Series User Manual
9
Advertisement
Table of Contents
