Philips DTR3030M User Manual page 67

3.6.2.2 Channel Upgrade
This menu is used for automatic update configuration of channel list.
The receiver is set in factory to automatic update channels on standby during the first thirty minutes from the off
mode, and daily at 4:30 in the morning. Alternatively, it can be disabled.
3.6.2.3 Timer Setting
From this menu you can manually program a simple vision timer or a timer for recording one or more TV events.
Proceed as described here:
Access the menu Settings > Activities Plan > Timer Settings.
Press the Green Add button.
Complete the field Add New Timer to define the timer:
1. Channel Number: the number of the interested channel.
2. Start date: start date (DD/MM/YYYY).
3. Start time: start time (in form hh: mm).
4. Type: type of timer, between recording (PVR) or vision (channel).
5. Duration: duration of the Timer.
Save your data by pressing the OK button on the remote control to Save item (or Cancel to abolish
the timer).
NOTES AND WARNINGS
No timer will work if the receiver is off in standby power saving mode (par. 3.6.1.3).
You can delete a schedule timer by selecting the list and pressing the Red button Delete.
Philips DTR3030M
23