Rear Panel Connections - Philips DTR3030M User Manual

1.2.2 Rear panel connections

1. RF IN antenna Input.
2. RF OUT antenna loop Output for connecting a device with digital TV tuner terrestrial (optional).
WARNING
When the receiver is in standby power saving (par. 3.6.1.5), the antenna loop output is not active.
3. S/PDIF optical digital audio output for multi-channel audio amplifiers Home-Theater (optional).
4. USB USB Connectors for reading personal multimedia content (videos, pictures, music) and video
recording from integrated digital terrestrial tuner when allowed by the transmission.
WARNINGS
Compatible with USB storage devices formatted with the file system of FAT16, FAT32 and NTFS.
Cannot be guaranteed compatibility with all USB memory devices on the market.
We recommend using USB HDD with external power supply, since the receiver cannot guarantee
the proper power supply through the USB port. This will avoid a possible damage to the storage
device.
ETHERNET Ethernet Interface to connect with your modem/router for the broadband data connection,
5.
wide application portal
1.2.3
6. HDMI audio-video HDMI output for digital high definition, used to connecting a screen with HDMI interface
compatible with HDCP protection.
NOTE
If the screen connected to the receiver via HDMI interface shows with difficulties, first connect the receiver
via SCART and adjust the video Resolution through menu Settings > Receiver Configurations> > A/V
settings from the same receiver, according to the characteristics of the connected screen.
7. SCART SCART audio-video analog output with standard-resolution for connection with a monitor/TV, an
alternative to HDMI output.
12V/1.5 A Power input 12V
8.
, as well as media files shared on your local network. See also par.
Philips
1.5A, for connection with power supply of which 230V ~ 50 Hz.
Philips DTR3030M
3