Amt Configuration - Vecow EMBC-1000 User Manual

4.3.2 AMT Configuration

Intel AMT
Enable/disable Intel Active Management Technology BIOS Extension.
Note: iAMT H/W is always enabled. This option just controls the BIOS extension
execution. If enabled, this requires additional firmware in the SPI device.
4.3.3 PCH-FW Configuration
ME Unconfig on RTC Clear State
Disabling this option will cause ME not to unconfigure on RTC clear.
ME State
Set ME to soft temporarily disabled.
©Vecow EMBC-1000 User Manual
Figure 4-3-2 : Intel AMT Settings
Figure 4-3-3 : PCH-FW Settings
BIOS SETTING 48