Vecow EMBC-1000 User Manual page 33

Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection.
The LED indicator on the right bottom corner lightens solid green when the
cable is properly connected to a 100Mbps Ethernet network and solid orange
when the cable is properly connected to a 1000Mbps Ethernet network. The left
LED will keep blinking off when Ethernet data packets are being transmitted/
received.
LED
Right
Bottom Led
Left
Bottom Led
2.2.12 CON1, J3 : LVDS
EMBC-1000 supports dual-channel 24-bit LVDS display, up to 1920 x 1200
pixels resolution. The pin assignments of CON1 are listed in the following table:
©Vecow EMBC-1000 User Manual
10Mbps 100Mbps
Solid
Off
Green
Blinking Blinking
Yellow Yellow
J3
1000Mbps
Solid
Orange
Blinking
Yellow
CON1
GETTING TO KNOW YOUR EMBC-1000
1 8
26