3.5 inch embedded single board computer with intel atom x7-e3950,
2 gige lan w/ieee 1588, isolated com,
tpm 2.0, -40 degrees celsius to 85 degrees celsius
Page 1
USER USER EMBC-2000 Manual Manual 3.5” Embedded Single Board Computer with Intel Atom ® x7-E3950, 2 GigE LAN w/IEEE 1588, Isolated COM, TPM 2.0, -40°C to 85°C 1.4.0 Edition 20190227...
Page 3
This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specifications are subject to change without prior notice. It does not represent commitment of Vecow Co., Ltd. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of the product;...
GENERAL INTRODUCTION 1.1 Overview EMBC-2000 3.5” Embedded Single Board Computer is an all-in-one, high performance, compact, and energy-saving embedded engine in the market. ® Powered by quad-core Intel Atom x7-E3950 Processor (Apollo Lake-I), single ® DDR3L SO-DIMM supports up to 8GB memory; Advanced Intel HD graphics 505 supports DirectX 12, OpenGL 4.3 and OpenCL 2.1 API, up to 4K resolution;...
• 12V DC Power Input, optional supports 9V to 36V wide range DC Power Input • Easy to customize for low-profile system applications • Optional for M.2/Mini PCIe/PCI/PCIe expansions 1.3 Product Specification 1.3.1 Specifications of EMBC-2000 System ® Processor Intel Atom...
GETTING TO KNOW YOUR EMBC-2000 2.1 Packing List Item Description EMBC-2000 SBC Driver/ User Manual DVD Screws & Cables (Below) Item Description Outlook Usage PHILLPIS Mini PCIe 53-2426906-30B M2.5x6L,Ni PHILLPIS USB 2.0 53-2426206-80B M3x6L,Ni+Ny Cable HEX #4-40x COM Cable 53-I000172-001...
Page 15
HDD_LED_P 2.2.3 Battery The EMBC-2000 real-time clock is powered by a lithium battery. It is equipped with Panasonic BR2032 190mAh lithium battery. It is recommended that you should not replace the lithium battery on your own. If the battery needs to be changed, please contact the Vecow RMA service team.
Page 16
2.2.4 CN4 : Audio Connector There are 3 audio connectors, Mic-in, Line-in and Line-out, in the top side of EMBC-2000. Onboard Realtek ALC892 audio codec supports 5.1 channel HD ® audio and fully complies with Intel High Definition Audio (Azalia) specifications.
Page 22
Ethernet engine. When both LAN 1 and LAN 2 work in normal status, basic iAMT function is enabled. Using suitable RJ-45 cable, you can connect EMBC-2000 system to a computer, or to any other devices with Ethernet connection, for example, a hub or a switch.
Page 23
Yellow 2.2.12 CON1, J4 : LVDS CON1 CON1 EMBC-2000 supports dual-channel 24-bit LVDS display and up to 1920 x 1200 pixels resolution. The pin assignments of CON1 are listed in the following table : Pin No. Signal Name Pin No.
Page 25
2.2.13 CN18 : Power Input CN18 EMBC-2000 supports 12V DC power input by wire-to-board connector on the top side. It can optionally support 9V to 36V input through an additional wide- range voltage power board, WPM-101. (please find below image and WPM-101 can be selected on the ordering information).
Page 26
2.2.14 CN1, CN2 : SATA III Connector There are 2 onboard high performance Serial ATA III (SATA III) on EMBC-2000. It supports higher storage capacity with less cabling effort and smaller required space. CN1 is co-use with CN15,which is selected by jumper JP5. The pin assignments of CN1 and CN2 are listed in the following table : Pin No.
2.3 Main Board Jumper Settings 2.3.1 Front View of EMBC-2000 Main Board With Jumper Location 2.3.2 JP3 : LVDS Module, Power Selection JP3 provides LVDS voltage selection function, closing Pin 1, 2 is for 3.3V LVDS power input; closing Pin 2, 3 is for 5V LVDS power input.
Page 59
APPENDIX A : Isolated DIO Guide A.1 Function Description The EMBC-2000 offers a 16-bit GPIO a pair of 10-bit internal connector and a watchdog timer. GPIO definition is shown below: JDIO1 JDIO2 Pin No. GPIO Definition Pin No. GPIO Definition...