Vecow EMBC-1000 User Manual page 24

2.2.5 JUSB1, JUSB2 : Internal USB2.0 Connector
The EMBC-1000 main board provides maxima eight expansion USB ports. The
USB interface supports 480 Mbps transfer rate which comply with high speed
USB specification Rev. 2.0.
The USB interface is accessed through one 10-pin JST 1.0mm connector. You
will need an adapter cable if you use a standard USB connector. The adapter
cable has a 10-pin connector on one end and a USB connector on the other.
The pin assignments of JUSB1 and JUSB2 are listed in the following table:
Connector Pin No.
1
2
JUSB1 3
4
5
JUSB2 JUSB1
Description Pin No.
USB_VCC
USB_VCC
USB_VCC
USB_D_4N
USB_D_4P
GETTING TO KNOW YOUR EMBC-1000
Description
6 USB_D_5N
7 USB_D_5P
8 GND
9 GND
10 GND
17