Vecow EMBC-1000 User Manual page 32

2.2.11 CN13 : LAN
CN13
There are two 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet
connections in the front side of MTC-4015. LAN 1 is powered by Intel
Ethernet engine; LAN 2 is powered by Intel I210 Ethernet engine. When both
LAN 1 and LAN 2 work in normal status, basic iAMT function is enabled.
Using suitable RJ-45 cable, you can connect MTC-4015 system to a computer
or to any other devices with Ethernet connection, for example, a hub or a
switch. Moreover, both LAN 1 and LAN 2 supports Wake on LAN and Pre-boot
functions. The pinouts of LAN 1 and LAN 2 are listed as follows:
Pin No.
1
2
3
4
5
6
7
8
10/ 100Mbps
E_TX+
E_TX-
E_RX+
----
-----
E_RX-
-----
------
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
GETTING TO KNOW YOUR EMBC-1000
®
218LM
25