12. Push Measure to measure from the selected
location. The Tester checks for the Sensor cable
connection. If the connection is good, the Tester
measures the machine under test. The following
screen appears when the measurement is
complete.
Table 4-18 is a list of the softkey functions for the
Measurement screen.
Table 4-18. Measurement Complete Functions
Softkey
Displays the options to Re-orient and
Relocate the Sensor and Re-measure.
More...
Push the required softkey to perform
the specific task.
Displays information and tips for how
Measure Tips
to take measurements.
Diagnose the measurements from a
Diagnose
machine.
Move to the next Sensor location on
Next Location
the drivetrain.
gbk61.bmp
Exit
Exit to the Startup screen.
4
Operation
How to Measure Vibration
Function
4-35