Fluke 810 User Manual page 109

The Tester IDs field shows the connected Tester
ID. If the Machine Setup is created in Viewer
software, the PC desktop entry also shows.
2. Select PC desktop.
Note
If you choose the Tester ID and the "Not
Transferred" filter, the Machine Setups not
transferred from that Tester to the Viewer
software show in the Setup list.
3. In the Select date field, fill in the Start Date and
the End Date. Or, click and use the calendar
to click on the date.
4. Choose a filter:
•
Select ALL to see all the Machine Setups in
the Viewer software database.
•
Transferred to see the Machine Setups
already transferred from the Viewer
software to the Tester.
• Not Transferred to see the Machine Setups
not transferred from the Tester to the
Viewer software yet.
5. Click Filter. The Machine Setups show in the
window according to the filter selection. The
Setup name, Setup date, Record status
(Complete or Incomplete), Modified date, and
Viewer Software
the Machine Setup status (setup is present or
not in the Tester) for each record also shows in
the window.
Note
Click the list header to put the items in ascending or
descending order by date.
6. Click the checkbox before the name to choose a
Machine Setup.
7. Click to export the Machine Setups to the
Tester. A prompt shows when the export is
done.
8. Click OK.
5
Preferences
gbk92.bmp
5-17