Fluke 810 User Manual page 51

Table 4-2 is a list of the options for the motor input.
Selection
AC
Select motor type
DC
Yes
AC motor with VFD
No
Enter Speed in RPM RPM Entry screen
Enter nominal HP (US)
Numeric keyboard
or
entry
Enter nominal kW (metric)
Horiz (Horizontal)
Motor mounted
Vert (Vertical)
Roller
Motor bearing type
Journal
Yes
Motor is detached from
drivetrain
No
[1]
The Tester cannot analyze drive trains with beveled gears where the shaft changes direction at a 90
Table 4-2. Motor Input Options
Option
Select the motor type of the machine under test.
For ac motor type, identify the motor as VFD (variable-frequency
drive) or not.
RPM Entry screen appears. Use the Tachometer to get the RPM.
Or, if you know the RPM, enter the value manually. See "RPM
Entry."
Push Keyboard to access the numeric keyboard. Enter the HP
(Horsepower) or the kW of the motor.
[1]
Identify the motor mounting as horizontal or vertical
[1] to enter the motor mounting as it affects Sensor orientation.
Select the bearing type in the motor. Different bearing types have
distinct vibration signatures.
Are you testing the motor only. If the motor is detached from the
drivetrain, select Yes.
Operation
Machine Setup
Description
[1]
. It is important
°
angle between components.
4
4-7