Functions - Eneo VMC-8.4LCD-CM Installation And Operating Instructions Manual

6. Functions

Buttons on the remote control are shown in brackets ( ).
6.1 On/Off (POWER)
Press the power button to switch the device on and off.
6.2 MODE (TV/AV)
Button to select the input signal (AV, DSUB and PC) and to select a submenu from the corresponding main menu
6.3 Menu
Press this button to enter the main menu.
This displays the submenus (Picture, Setup menu):
• on the monitor: using the MODE button (6)
• on the remote control: using the (
You can enter the individual submenus by activating:
• the ( ) buttons (3/4) on the monitor
• the MODE button (6) on the remote control
Selection of the functions in the submenu:
• on the monitor: by pressing the MODE button (6) repeatedly until the desired function is selected.
• on the remote control: by pressing the (
Adjusting the parameters in the submenu:
• on the monitor: by using the (
• on the remote control: using the (
Press the MENU button to exit the menus/submenus.
) buttons
) buttons (3/4) repeatedly until the desired function is selected.
) buttons (3/4)
) buttons.
9