Removal Procedure; Removal Procedure Of Indoor Unit - Gree GWH18TC-S3DNA1D Service Manual

Service Manual

11. Removal Procedure

11.1 Removal Procedure of Indoor Unit

18K
Steps
1. Before disassembling the unit
Before disassembling the unit.
2. Remove filter
Open the panel.
Loosen the clasps on filter, push the
filter inward and then pull it upward,
then the filter can be removed.
3.Remove guide louver
Remove the axial bushing of big
guidelouver.
Installation and Maintenance
Warning: Be sure to wait for a minimum
of 20 minutes after turning off all power
supplies and discharge the refrigerant
completely before removal.
Procedure
axial bushing
93