Gree GWH18TC-S3DNA1D Service Manual page 23

● TIMER OFF button
"TIMER OFF" button can set the time for timer off. After pressing this button,"
blinks. Press " ▲ " or "
or decrease 1min. Hold " ▲ " or "
word "OFF" will stop blinking. "
"TIMER OFF" button to cancel it.
Note:
● Under on and off status, you can set TIMER OFF or TIMER ON simultaneously.
● Before setting TIMER ON or TIMER OFF, please adjust the clock time.
● After starting up TIMER ON or TIMER OFF, set the constant circulating valid. After that, air conditioner will be turned on or turned off
according to setting time. ON/OFF button has no effect on setting. If you don't need this function, please use remote controller to cancel it.
11. CLOCK button
Press this button to set clock time. "
pressing of " ▲ " or "
Release this button when reaching your required time. Press "CLOCK" button to confirm the time. "
Note:
● Clock time adopts 24-hour mode.
● The interval between two operation can't exceeds 5s. Otherwise, remote controller will quit setting status. Operation for TIMER ON/TIMER
OFF is the same.
12. QUIET button(This function is unavailable for this model)
Press this button, the Quiet status is under the Auto Quiet mode (display "
and Quiet OFF (there is no signal of "
Note:
● The Quiet function cannot be set up in Fan and Dry mode; Under the Quiet mode, the fan speed is not available.
● If Auto Quiet mode has been selected, after the room temperature reached the setting temperature or 10mins later, the AC will immediately
enter into the Quiet running status, at this time the fan speed is not adjustable.
13. X-FAN button
Pressing this button in COOL or DRY mode, the icon "
dry the indoor unit even though you have turned off the unit. After energization, X-FAN OFF is defaulted.
X-FAN is not available in AUTO, FAN or HEAT mode.This function indicates that moisture on evaporator of indoor unit will be blowed after
the unit is stopped to avoid mould.
● Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will continue running for about 2 minutes. at
low speed. In this period, press X-FAN button to stop indoor fan directly.
● Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly.
14. LIGHT button
Press this button to turn off display light on indoor unit. "
display light. " " icon is displayed.
15. button(This function is unavailable for this model)
Press this button to achieve the on and off of healthy and scavenging functions in operation status. Press this button for the first time to start
scavenging function; LCD displays "
LCD displays " " and "
for the fourth t ime to start healthy function; LCD display "
16. TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature on indoor unit's
display. The setting on remote controlleris selected circularly as below:
20
" button to adjust TIMER OFF setting. After each pressing " ▲ " or "
" button, 2s later, the time will change quickly until reaching your required time. Press "TIMER OFF"
" icon resumes displaying. Cancel TIMER OFF. Under the condition that TIMER OFF is started up, press
" icon on remote controller will blink. Press " ▲ " or "
" button, clock time will increase or decrease 1 minute. If hold " ▲ " or "
" displayed), after powered on, the Quiet OFF is defaulted.
". Press the button for the second time to start healthy and scavenging functions simultaneously;
" . Press this button for the third time to quit healthy and scavenging functions simultaneously. Press the button
"icon disappears and the word "OFF" on remote controller
" and "AUTO" signal ) and Quiet mode (display "
" is displayed and the indoor fan will continue operation for 2 minutes in order to
" icon on remote controller disappears. Press this button again to turn on
" . Press this button again to repeat the operation above.
no display
Service Manual
" button, TIMER OFF setting will increase
" button within 5s to set clock time. Each
" button, 2s later, time will change quickly.
" icon stops blinking.
Technical Information
" singal)