Honeywell PM23c User Manual page 97

PM23c, PM43, and PM43c Mid-Range Printer User Manual
Maintenance and Error Alerts (continued)
Error Alert
Faulty Dot
Replace Printhead
Clean Printhead
No RFID Tag Found The printer can not find an RFID tag.
RFID Not Installed
Upgrading Firmware The printer is going to start upgrading the
Printer is Rebooting The printer is going to restart. Wait until the printer
Started
Motor Too Hot
Chapter 5 – Troubleshoot the Printer
Solution
The printhead has reached the number of faulty
dots set in the Faulty Dots setting in Maintenance
Alerts. You may need to replace the printhead.
The printer has reached a limit set in the Replace
Printhead setting in Maintenance Alerts for the
amount of media to print before replacing the
printhead. Replace the printhead.
The printer has reached a limit set in the Clean
Printhead setting in Maintenance Alerts for the
amount of media to print before cleaning the
printhead. Clean the printhead.
You are attempting to write to a tag, but the printer
does not support RFID. You must install the RFID
module in the printer to be able to write to RFID
tags.
firmware. Do not try to send anything to the
printer.
is ready before attempting to communicate with it.
The printer is in the process of starting up.
The printer motor has reached its maximum
operating temperature limit. Let the motor cool
down before you resume printing.
87