About Wireless Communications; Configure Wireless Communications From The Web Page - Honeywell PM23c User Manual

Chapter 3 – Connect the Printer

About Wireless Communications

48
The printer supports wireless communications when the optional Wi-Fi/
Bluetooth module is installed.
You can configure wireless communications:
• from the printer web page.
• from the printer Main menu if your printer has full touch display front
panel.
By default, the printer supports DHCP networks.
Note: If you are not using a DHCP network, you need to configure Wi-Fi
settings by using Intermec PrintSet through a USB connection to the
printer, by sending commands through a serial connection, or by using
the wizards and settings menus on a full touch printer.
Configure Wireless Communications from the
Web Page
Use this procedure to configure wireless communications from the printer
web page.
Note: To configure the printer from the web page, the printer must be
turned on and connected to your Wi-Fi or Ethernet network.
1 Open a web browser on your PC.
2 In the address bar, type the IP address of your printer and press
Enter. The printer web page appears.
3 Click Login. The Login page appears.
4 Type your Username and Password and then click Login. The
default value for Username is admin and the default value for
Password is pass.
5 Click the Configure tab. The Configuration Summary page appears.
PM23c, PM43, and PM43c Mid-Range Printer User Manual