Table of Contents
Advertisement
Chapter 2 – Set Up the Printer
Load Media for Tear-Off Printing
26
You can install an optional label taken sensor that detects when the
current label is removed and prints the next label.
1 Open the media cover.
2 Turn the printhead lift lever counterclockwise to raise the printhead.
3 Load a media roll onto the media supply hub. Make sure you push the
roll all the way against the inner wall of the printer and adjust the edge
guide and the dancer guide to hold the media in place.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Advertisement
Table of Contents
