System Network Services - Honeywell PM23c User Manual

Appendix B – Default Settings

System Network Services

142
This section lists the network services you can manage from the printer.
You will only see Manage Services from the menus if you have an
Ethernet or Wireless module installed in the printer. To view these
services:
• From the printer Main Menu, select Settings > System Settings >
Manage Services.
• From the printer web page, click the Configure tab, System Settings
> Manage Services.
System Network Services
Service Description
Web Server Determines if the web server is enabled in the
printer.
FTP Determines if the printer can use File Transfer
Protocol (FTP).
Avalanche Determines if the printer can be managed by
Wavelink Avalanche.
Net1 Determines if the printer can use Telnet to
communicate with Fingerprint.
SmartSystems Determines if the printer can be managed by
Intermec SmartSystems Foundation.
SNMP Determines if the printer can use SNMP.
LPR Determines if the printer can use the line
printer server (LPR) daemon.
IKEv2 Determines if the printer can use IKEv2.
SSH Determines if the printer can use Secure
Socket Handling (SSH).
Telnet Determines if the printer can use Telnet.
XML Determines if the printer can use XML printing. Enable
Time Server Determines if the printer uses the Network
Time Protocol (NTP) to synchronize its time
with a network time server. The default Server
Address is ntp0.cornell.edu, and the default
Port Number is 123.
PM23c, PM43, and PM43c Mid-Range Printer User Manual
Default
Enable
Enable
Enable
Enable
Enable
Enable
Enable
Disable
Enable
Enable
Disable