Set The Command Language From The Main Menu; Printer Options And Accessories - Honeywell PM23c User Manual

Set the Command Language from the Main Menu

Printer Options and Accessories

PM23c, PM43, and PM43c Mid-Range Printer User Manual
7 Click System Settings > General.
8 Select a different printer command language from the Command
Language list, and then click Save.
9 Click the Services tab.
10 Click Reboot Printer, and then click Reboot. The printer restarts in
the command language you selected.
If you have a full touch printer, you can use this procedure to change the
printer command language from the Main Menu.
1 From the Ready screen, press the Main Menu button.
2 From the Main Menu, press Settings > System Settings > General.
3 Scroll down until you reach Command Language.
4 Use the horizontal scroll bar to select the command language you
want to use and then save your change.
5 Turn the printer off and then on. The printer starts up in the command
language you selected.
You can use these printer options and accessories (sold and ordered
separately) with the PM23c, PM43, and PM43c printers. Most options are
either installed at the factory or can be installed by factory service
technicians in the field. Accessories are designed to be installed by the
customer.
PM23c, PM43, and PM43c Options and Accessories
Option or
Accessory
1-inch Hanger
Airline Boarding
Pass
Supported
Printer Description
PM23c Use the 1-inch hanger when you are
using very narrow media.
PM43c Use the airline boarding pass option
to print boarding passes from fanfold
media. The airline boarding pass
options include a ticket shelf, media
guides, and an extended tray.
Chapter 1 – About the Printer
19