Table of Contents
Advertisement
w , q to select the channel type.
–
You can select the channel type from the followings.
•
All : All channels including TV, Radio, Data, etc. will be searched.
•
TV
•
Radio
to start the Auto
Setup
–
Go to step
when you
select "All" in step
.
8
–
It takes time. Please follow the
instruction on the screen.
–
This unit is checking signals
during displaying "Please wait".
"Locked" appears when the
checking is finished. Both DISH
IN 1 and 2 are checking the signals when both terminals are
connected.
•
If "Locked" does not appears, the signal is weak, and Auto Setup
will not start. Check that the satellite dish is correctly positioned
and corrected.
to continue the
Auto Setup.
–
Ensure that signals to both DISH
IN 1 and 2 are locked before
starting scan.
to start the scan.
–
The scan starts.
Delete unwanted
channels.
–
To delete all channels of each
type on the screen (other than
Free TV), press the "Red"
button. And then press [
to select the channel type you
want to delete, press [OK].
–
To remove the selected channel, press [
you want to remove, press [OK]. The check mark is removed.
BACK/
RETURN
to confirm deletion.
Other Satellite Auto Setup - Satellite Selection
Satellite Selection
Search Mode
Channel Type
freesat and other satellite channels
DISH Input 1 - Signal Quality
DISH Input 1 - Signal Strength
DISH Input 1 - Signal Lock
DISH Input 2 - Signal Quality
DISH Input 2 - Signal Strength
DISH Input 2 - Signal Lock
Continue
RETURN
The bar appears beside signal Quality
and Signal Strength when the signal is
input.
Other Satellite Auto Setup
All other satellite tuning data will be erased.
Continue
RETURN
Other Satellite Auto Setup - Satellite Scan
Satellite Scan
Please wait... This may take up to 45 minutes to complete.
Free TV Channels found
Free Radio Channels found
Data Channels found
Pay TV Channels found
RETURN
Other Satellite Auto Setup Select Channels to Remove
Name
BBC R5L
ETV2
BBC 1 Wales
BBC 2 Wales
BBC 1 Scotland
BBC 2 Scotland
Select
Kept Channels:
]
Remove
e , r
Available Space:
Found Channels:
RETURN
Multiple delete
] to select the channel
e , r
Notes
Astra2/Eurobird
•
When the below screen appears after
All
step
All
0
10
Other satellite Auto Setup
0
10
Locked
0
10
0
10
Locked
This screen appears when this unit does
not detect the connection to DISH IN 2.
When you connect DISH IN 1 only press
[OK], then go to step
When you connect both DISH IN 1 and
2, turn this unit off and check your
connection. Then perform from step
•
Auto Setup can take up to 45 minutes.
0
100%
0
0
0
0
1/7
All Channels
Type
Keep
Radio
Tips
Free TV
Free TV
Free TV
To select the type
Free TV
Press the "Blue" button in step
Free TV
Each time you press the "Blue" button, the
42
2957
type will be changed as follows.
CH
Page Up
42
Page Down
All Channels ➔ Free TV ➔ Pay TV ➔ Radio ➔
Channel type
Data ➔ Unknown ➔ All Channels ➔ ...
To restore all channels
Press the "Red" button, and then press
[ e , r ] to select "Restore all channels",
press [OK] in step
To restore the channel
Press [ e , r ] to select the channel you
want to restore, press [OK] in step
check mark is displayed.
.
No sate lite s gnals detected at d sh 2 nput
Please check dish nstallat on / connection before starting sea ch
otherwise record / playback function will be lim ted
S ect
Set cha acte
Se ect
RETURN
or
.
.
.
.
. The
17
RQT9431
Advertisement
Table of Contents
