Panasonic DIGA DMR-XS350EB Operating Instructions Manual page 73

■Select the units to register
Press [ e , r ] to select "Create List", then press [ q ].
Press [ e , r ] to select "New Item", then press [OK].
Destination Capacity: 4343MB
New Item
By Picture ( Date )
Title
Press [ e , r ] to select the item, then press [OK].
e.g.,
HDD
By Picture ( Date )
By Picture ( Album )
By Date Folder
By Album
Register with "By Picture (Date/Album)"/"Picture"
1. Press [ e , r ] to select "New item", then press [OK].
2. Press [ e , r , w , q ] to select the still picture, then
press [ h ]. A check mark is displayed. Repeat this step
until you select all necessary items.
– Press [ h ] again to cancel.
– Press [ u , i ] to show other pages.
– The items will be copied in the order of the copying
list. If you want to specify the order, repeat selecting
one item at a time.
– To select another folder (➔ right)
3. Press [OK].
– To edit the copying list (➔ right)
4. Press [ w ] to confi rm.
Register with "By Date Folder"/"By Album"/"Album"
1. Press [ e , r ] to select "New item", then press [OK].
2. Press [ e , r , w , q ] to select the folder, then press [ h ].
A check mark is displayed. Repeat this step until you
select all necessary items.
– Press [ h ] again to cancel.
– Press [ u , i ] to show other pages.
– The items will be copied in the order of the copying
list. If you want to specify the order, repeat selecting
one item at a time.
3. Press [OK].
– To edit the copying list (➔ right)
4. Press [ w ] to confi rm.
Press [ e , r ] to select "Start Copying", then press
[OK].
–Only when copied with "By Picture (Album)" from
to or from
RAM SD RAM
When specifying another a bum as the copying destination,
select "Album".
Album New album
Press [ w , q ] to select "Yes", then press [OK] to
start copying.
Tips
To return to the previous screen in steps
Press [BACK/RETURN ].
To stop copying after step
Press and hold [BACK/RETURN ] for 3 seconds.
Notes
• The sequence in which the still pictures are registered on the copy
list may not be the same at the copy destination.
• If still pictures are already contained inside the copy destination
folder, the new still pictures are recorded following the existing still
pictures.
e.g.,
SD
Picture
Album
HDD
to
HDD SD
t
to
Edit the copying list
Select the item after step –
Press [OPTION].
Delete All Delete all items registered on the copying list.
1. Press [ e , r ] to select "Delete All", then
press [OK].
2. Press [ w , q ] to select "Yes", then press
[OK].
Add Add new items to the copying list.
1. Press [ e , r ] to select "Add", then press
[OK].
2. Press [ e , r , w , q ] to select the still
picture or folder, then press [ h ].
A check mark is displayed. Repeat this
step until you select all necessary items.
• Press [ h ] again to cancel.
3. Press [OK].
Delete Delete the selected items.
1. Press [ e , r ] to select "Delete", then press
[OK].
2. Press [ w , q ] to select "Yes", then press
[OK].
Cancel all registered copying setting and lists
After performing steps −
copying list)
Press [ e , r ] to select "Cancel All", then press
[OK].
Press [ w ] to select "Yes", then press [OK].
• The settings and lists may be cancelled in the following
situations.
– When a title, still picture, etc. has been recorded or deleted
at the copy source
– When steps have been taken, for instance, to turn off the
unit, open the tray, change the copy direction, etc.
Select another folder
After performing step –3–1 [➔ left, Register with "By Picture
(Date/Album)"/"Picture"]
Press [OPTION].
Press [OK].
Press [ e , r , w , q ] to select the folder, then press [OK].
–The still pictures of different folders cannot be registered on the
same list.
– (➔ left).
3
Delete All Delete All
Ad d Ad d
Delete Delete
(➔ 72, Copying using the
73
RQT9431