Basic Connection
When your Television does not have an HDMI input terminal
In this setting, you cannot enjoy HDTV in HD picture quality. The resolution will be 576i/480i.
To household
mains socket
Connect only after all other connections are complete.
After completing the connections, proceed to the TV Tuning (➔ 13).
•
Refer to page 116 if "U50", "U50 1" or "U50 2" appears on the unit's display.
Notes
•
The freesat channel uses Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East satellites. To ensure your satellite
dish is correctly installed please consult your freesat registered dealer.
•
If you connect 2 satellite dishes for different satellites (e.g., DISH IN 1: Astra 28.2, DISH IN 2: Astra 19.2), the unit
cannot receive the signal correctly.
•
You can use the unit as one tuner when connecting DISH IN 1 to a satellite dish that can receive SKY.
Tips
•
You can check the satellite signal condition using "Signal Condition" in the Setup menu (➔ 96).
•
Additional Connections (➔ 109).
12
RQT9431
DISH IN 1
DISH IN 2
AC IN
This unit
TV
AV
AV1 (TV)
21-pin Scart cable (not supplied)