Table of Contents
Advertisement
Remote Control Information/Unit Care
Remote Control Information
About batteries
•
Insert so the poles ( 4 and
) match those in the remote control.
R6/LR6, AA
•
Use alkaline or manganese batteries.
•
Do not mix old and new batteries.
•
Do not use different types at the same time.
•
Do not heat or expose to flame.
•
Do not leave the batteries in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
•
Do not take apart or short circuit.
•
Do not attempt to recharge alkaline or manganese batteries.
•
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Unit Care
The precision parts in this unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.
To clean this unit, wipe with a soft, dry cloth.
•
Never use alcohol, paint thinner or benzine to clean this unit.
•
Before using chemically treated cloth, carefully read the instructions
that came with the cloth.
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit's lens over time, making it
impossible to record or play discs.
Use the Lens cleaner (not included) about once every year,
depending on frequency of use and the operating environment.
Carefully read the lens cleaner's instructions before use.
Lens cleaner: RP-CL720E
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited
material due to a problem with the unit or recordable media, and accepts no responsibility and offers
material due to a problem with the unit or recordable media, and accepts no responsibility and offers
no compensation for any subsequent damage caused by such loss.
no compensation for any subsequent damage caused by such loss.
Examples of causes of such losses are
Examples of causes of such losses are
•
•
A disc copied and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another
A disc copied and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another
company.
company.
•
•
A disc used as described above and then played again in this unit.
A disc used as described above and then played again in this unit.
•
•
A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in
A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in
this unit.
this unit.
Using the remote control
Aim at the sensor, avoiding obstacles, up to a maximum range of 7 m
directly in front of the unit.
Remote control signal sensor
20
20
30
30
Do not place the unit on
amplifi ers or equipment that may
become hot.
The heat can damage the unit.
Select a position with good ventilation when installing the unit. Do
not block the cooling fan on the rear of the unit.
Before moving the unit, ensure the disc tray is empty.
Failure to do so will risk severely damaging the disc and
the unit.
DO NOT
7
RQT9431
Advertisement
Table of Contents
