Additional Connections
•
You can connect this unit to a TV using the audio/video (AV) cable, S Video cable or component video cables instead of the 21-
pin Scart cable (➔ 10, 11, 12, 109).
Using an Audio/Video Cable (not included)
Using Component Video Cables (not included)
The COMPONENT VIDEO OUT terminals on this unit can be used for either interlace or progressive output (➔ 135) to provide a
purer picture than the S VIDEO OUT terminal.
Required settings
•
Set "HDMI Video Mode" to "Off" (➔ 102
•
Set "AV1 Output" to "Video (with component)" or "S Video
(with component)" (➔ 102
•
Set "Component Resolution" to the item compatible with
connected equipment (➔ 102
Notes
If you have a regular television (CRT: cathode ray tube)
Progressive output may cause some flickering, even if it is
progressive compatible. Set "HDMI Video Mode" in the Setup
menu to "Off" and "Component Resolution" in the Setup menu
to "576i/480i" if you are concerned about it (➔ 102).
This is the same for multi-system televisions using PAL mode.
110
RQT9431
TV
AUDIO IN VIDEO
R
L
IN
This unit
R - AUDIO - L
VIDEO
Component video cables
Audio cable
).
).
).
Using an S Video Cable (not included)
The S VIDEO OUT terminal achieves a more vivid picture
than the VIDEO OUT terminal. (Actual results depend on the
television.)
S Video cable
Audio cable
TV
COMPONENT
VIDEO IN
AUDIO IN
Y
P
P
R
L
B
R
This unit
COMPONENT
P
P
Y
R
B
VIDEO OUT
R - AUDIO - L
COMPONENT
VIDEO OUT
Use component output
with progressive "Off".
This unit
TV
AUDIO IN
S VIDEO
R
L
IN
This unit
R - AUDIO - L
S VIDEO
CRT
COMPONENT
VIDEO IN