Table of Contents
Advertisement
Chapter 3 Adjustment and Settings
3-7. Setting the EIZO Logo Display [Logo]
The EIZO logo appears on the display when turning on the monitor. This function allows you to
display, or not, the EIZO logo. (Default settings : Off)
Procedure
1.
Press
2.
Press
The Optional Settings menu appears.
3.
Choose <Logo> from the <Optional Settings> menu, and press
4.
Select "On" or "Off" with
5.
Select "Finish" with
6.
Press
The Optional Settings menu is closed.
3-8. Setting Orientation
●
Using Image Rotation Function [Image Rotation]
Image Rotaion function allows you to change the display orientation of the monitor with the
panel rotation. (Default settings : On)
Note
•
After changing the display orientation, it may take some time until the screen image is available.
•
The Image Rotaion function may not work correctly using with some graphics card or OS.
•
When using the Image Rotation function with dual display, the screen image of either monitor can
disapper. If so, redisplay the image by "Display Properties" (for Windows only).
Procedure
1.
Choose <Screen> from the Adjustment menu, and press
2.
Choose <ImageRotation> from the <Screen> menu, and press
3.
Select "On" or "Off" with
4.
Press
Operating Procedures
1.
Turn the panel 90 degrees.
Since the default setting of <Image Rotation> is set to "Enable", the screen image
responding to the panel orientation will be available.
2.
When the screen image is expanded or contracted, restart the PC.
The Image Rotation function may not work correctly using with some graphics card or
OS. When the screen image remains to be expanded or contracted after restarting the PC,
please try to change the screen resolution setting of your PC system.
0
to turn off the monitor.
holding
down at least 2 seconds to turn on the monitor.
or
or
.
to exit the Optional Settings.
or
to exit the adjustment.
, and press
.
.
.
.
.
Advertisement
Table of Contents
