Table of Contents
Advertisement
Problems
15. The auto adjust function does not
work correctly.
16. The monitor connected with the
USB cable is not detected. / USB
devices connected to the monitor
does not work.
Possible cause and remedy
•
This function does not work when digital signal is
input.
•
This function is intended for use on the Macintosh and
on AT-compatible PC running Windows. It may not
work properly in either of the following cases. It does
not work properly when an image is displayed only
on a part of the screen (command prompt window,
for example) or when a black background (wallpaper,
etc.) is in use.
•
This function does not work correctly with some
graphics boards.
•
Check whether the USB cable is connected correctly.
(page 38)
•
Change the USB port to another one. If the PC or
peripheral devices works correctly by changing the
USB port, contact your local dealer. (Refer to the
manual of the PC for details.)
•
Reboot the PC.
•
If the peripheral devices work correctly when the PC
and peripheral devices are connected directly, please
contact your local dealer.
•
Check whether the PC and OS are USB compliant.
(For USB compliance of the respective devices,
consult their manufacturers.)
•
Check the PC's BIOS setting for USB when using
Windows. (Refer to the manual of the PC for details.)
Chapter 4 Troubleshooting
Advertisement
Table of Contents
