Setting Items For Sending Faxes - Canon MB5100 Series Online Manual

Setting Items for Sending Faxes

You can change the send settings such as the scan contrast or the scan resolution on the Fax standby
screen.
Tap to change the send settings.
• ScanRes.
The following settings of the scan resolution are selectable.
Standard
Suitable for text-only documents.
Fine
Suitable for fine-print documents.
Extra fine
Suitable for detailed illustration or fine-print quality documents.
If the recipient's fax device is not compatible with Extra fine (300 x 300 dpi), the fax will be sent in
the Standard or Fine resolution.
Photo
Suitable for photographs.
Note
• When sending a color fax, documents are always scanned in the same resolution (200 x 200 dpi).
The image quality (compression rate) is determined by which scan resolution is selected, except
that Extra fine and Photo provide the same image quality.
• Contrast
Select a setting of the scan contrast from Lower, Standard, and Higher.
• ADF duplex scan
Select a scanning method when loading document in the ADF.
Note
• After sending a fax with Duplex, this setting returns to Simplex automatically.
The touch screen returns to the Fax standby screen when you finish specifying the setting and tapping OK.
764