Canon MB5100 Series Online Manual page 1021

2801
Cause
Document is jammed in ADF.
What to Do
Remove the document following the procedure below.
Important
• The printer cannot be turned off while it is sending or receiving a fax, or when the received fax or the
unsent fax are stored in the printer's memory.
Turn off the printer after making sure it has completed sending or receiving all the faxes. Do not
unplug when turning off the printer.
If you unplug the power cord, all the faxes stored in the printer's memory are deleted.
• If the original remains in the ADF by pressing the Stop button while the printer is scanning the
document:
If you press the Stop button during scanning then the document remained in the ADF, the message
about the paper remained in the ADF appears on the touch screen. Tap OK so that the remaining
document is automatically fed out.
• If the original is jammed in the ADF:
Remove the document following the procedure below.
1. If printing is in progress, press Stop button.
2. Turn off printer.
3. If a multi-page document is loaded, remove any pages other than jammed page from ADF and
open document feeder cover.
4. Pull out jammed document from ADF.
1021