Tx Test Specification - Alinco DR-135 Service Manual

5) Tx Test Specification

TEST ITEM
TX Output
HI POWER
TX Output
MID POWER
TX Output
LOW POWER
Drain Current
Frequency
Deviation
Spurious
Modulation Level
CTCSS
Modulation Level
DCS Modulation
Level
48
CONDITION ADJ STANDARD TEST STANDARD
430.00MHz 35 ± 1W
440.00MHz
450.00MHz
440.00MHz 10 ± 1W
440.00MHz 5 ± 1W
440.00MHz Less than
9A
440.00MHz Within ± 0.5KHz
More than 62dB
430.00MHz
More than 62dB
440.00MHz
More than 62dB
450.00MHz
WIDE 3.0 ± 0.1KHz/DEV
440.00MHz 4.5 ± 0.1KHz/DEV
NARROW 2.2 ± 0.1KHz/DEV
440.00MHz
WIDE 500~1000Hz/DEV 500~1000Hz/DEV 88.5Hz
440.00MHz
WIDE 800 ± 200Hz/DEV
440.00MHz
NARROW 450 ± 100Hz/DEV
440.00MHz
35 ± 3W
35 ± 3W
35 3W
±
10 ± 2W
5 ± 2W
Less than
10A
Within ± 1.0KHz
More than 60dB M and L standard power
More than 60dB is also the same as of H
More than 60dB power level
450MHz TM2
ONLY
3.0 ± 0.2KHz/DEV MIC IN 4mVemf
4.5 ± 0.2KHz/DEV MIC IN 40mVemf
2.2 ± 0.2KHz/DEV MIC IN 40mVemf
3KHz LPF ON
800 ± 200Hz/DEV Code 255
3KHz LPF ON
450 ± 100Hz/DEV Code 255
3KHz LPF ON
NOTE