Tail Assembly - Oxy Heli oxy2 Instruction Manual

Tail Shaft Assembly
(Box 1/Bag 4)
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it ready to use.
Tail Pitch Slider Assembly
(Box 1/Bag 5)
OXY0255 - Tail pitch
Slider Haft Moon
OXY0541 - Tail Pitch
Slider Ring
2 x MR683-3x7x2
Radial Bearing
OXY0457 - Tail Pitch
Slider Bushing
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it ready to use.
Tail Belt Crank Assembly
(Box 1/Bag 6)
2 x OXY0460 -
Bell Crank Bushing
2 x MR52-W2-
2X5X2 Radial Bearing
Important Note:
This part, for tuning reasons,
comes factory pre assembled,
it ready to use.
page 9
Tail Shaft 16T
2 x M1.4x4
Pan Head Screw
Important Note:
This part comes pre assembled,
WITHOUT THREAD lock. Follow
the instruction for final assembly.
Do not over tighten
Pan Head Screw 2XM1.4x4
2 x OXY0448 - Bell Crank
Pin Screw
OXY0252 - Al Tail
Bell Carnk
Chapter 6:Tail Assembly
2 x OXY0522-
Link Control
2 x OXY0523-Link
Control Bushing