Main Rotor Assembly - Oxy Heli oxy2 Instruction Manual

Main Grip Assembly
(Box 1-1/Bag 5)
OXY0228-Main Grip
DFC Arm Assembly
(Box 1-1/Bag 5)
OXY0526-Plastic
Linkage Ball 3mm

Main Rotor Assembly

(Box 1-1/Bag 5)
OXY0227 - Center Hub
Important Note:
This part comes pre assembled
WITHOUT thread lock. Follow
the instruction for final assembly.
Fine Adjust Shims:
In order to give fine adjustment options,
the extra Hardware Bag contains extra
Shims 2.55x4.5x0.1. Start assembly with one (each side)
pre installed shim. If the Main Grips have
sideway play, add shims as required.
Each Grips must have the same number
of shims. If you add one shim on the left
side, you need to also add one shim on
the right side.
page 23
F2.5-6GC-2.5x6x3
Thrust Bearing
2 x SMR682X_ZZC_3
2.5x6x2.6 Radial Bearing
OXY0519-M1.4 x7
Threaded Rod
OXY0529 - DFC Arm
OXY0446 -
Spindle Shaft
O'ring 3W1.5
OXY0229 -
Dampener Bushing
Chapter 11: Main Rotor Assembly
2.70
add silicon
grease
2.50
REF 24.5 mm
OXY0524-
2.55X4.5X0.1 Shim
See Fine Adjust Shims Note.
OXY0528 -
Damperner Spacer
A
OXY0525-
1.6X3.5X0.5 Washer
Important Note:
This part, for tuning reasons,
comes factory pre assembled
with grease and loctite. It is
ready to use.
Important Note:
This part, for tuning reasons,
comes factory pre assembled.
Step faced to Main Grip
2x M1.6x5
Hex Cap Screw